PUTTY REINFORCING MESH ETIX 106 60g/m2

60 g/m² glass fiber reinforcement mesh is used to reinforce surface putty in interior finishing works.

• The reinforcing mesh covered with polymer dispersion helps to prevent the formation of cracks on the finishing surface to be reinforced

Advantages:
• Helps prevent the formation of cracks on the finishing surface to be reinforced
• Alkali resistant
• Non-stretchy and tear-resistant

Installation:
• Apply the putty mixture across the width of the reinforcing mesh tile to the surface to be finished so that the mixture thickness is about 2/3 of the final thickness of the layer
• Press the reinforcing mesh straight, without wrinkles, into the mixture
• Spread the mixture that has come through the mesh. Install the following tiles with an overlap of 10 cm
• Putty over the reinforcing mesh so that the mesh is completely covered with the mixture. The overall thickness of the finishing layer depends on the mixture used

• Material: Glass fiber coated with polymer dispersion
• Storage: store in an upright position, keep dry and protected from moisture