EJOT TYPE H4 D8/60X215MM

Approved for all substrates (A, B, C, D, E)

Combined plastic and steel nail
Plastic cap to mediate the formation of cold bridges
Can be installed with an additional plate
Very good tensile strength even on problematic substrates
Complete set
Designed for mineral wool and polystyrene

Technical specifications
Case diameter 8 mm
The diameter of the plate is 60 mm
Borehole depth h1 ≥ 35 mm
Min. anchoring depth ef ≥ 25 mm (A, B, C)
Min. anchoring depth ef ≥ 65 mm (D, E)
Point thermal conductivity 0.002 W/K
For substrates ETA A, B, C, D, E
European Technical Approval ETA ETA-11/0192

Detailed information