CONTACT CLEANER WD40 400 ML

A tool for removing oil, flux residues, dirt and condensate from sensitive electrical and electronic equipment. Penetrates immediately into hard-to-reach areas, dries quickly without leaving any residue. Area of use: printed circuit boards, switches, spark plugs, etc.

Usage. Shake the package thoroughly. Unplug the equipment and allow hot surfaces to cool. Spray directly on the device from a distance of 15-20 cm. Tilt the surface to be cleaned so that excess liquid drains away. Make sure the device is completely dry before plugging it back in.

Caution. H319 Causes severe eye irritation. H315 Causes skin irritation. H336 May cause drowsiness or dizziness. H411 Toxic to aquatic life with long lasting effects. H222 Extremely flammable aerosol. H229 Container under pressure: may explode if heated. P101 When consulting a doctor, take the product packaging or label with you. P102 Keep out of reach of children. P210 Keep away from heat, sparks, flames, hot surfaces. – Do not smoke. P211 Do not spray into flames or other ignition sources. P251 Container is pressurized: do not crush or burn even after use. P261 Avoid breathing vapour/spray. P273 Avoid release to the environment. P280 Wear protective gloves/goggles. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if worn and easy to remove. Rinse once more. P312 If you feel unwell, call a POISON CENTER or doctor. P405 Keep locked up. P410+P412 Keep out of sunlight. Do not store above 50 °C. P501 Dispose of contents/container in accordance with local/national regulations.

An explosive mixture may form if there is insufficient ventilation.
Hazardous components: Hydrocarbons, C6, isoalkanes, <5% n-hexane; Hydrocarbons, C7, n-alkanes, isoalkanes, cyclics; Propan-2-ol. Contains >30% aliphatic hydrocarbons.